Releasing seat belts, Locking, Releasing seat belts locking – Mercedes-Benz CLK-Coupe 2006 Owners Manual User Manual

Page 60

Advertising
background image

59

Getting started

Parking and locking

Releasing seat belts

̈

Press the seat belt release button
(

page 46).

Allow the retractor to completely re-
wind the seat belt by guiding the latch
plate.

Locking

!

If you hear a warning signal, you have
probably tried to turn off the engine
without the gear selector lever in P.

Place the gear selector lever in P.

!

Make sure the seat belt retracts fully so
that the seat belt and/or latch plate
cannot get caught or pinched in the
door or in the seat mechanism. This
can damage the seat belt and impair
the effectiveness of the seat belt,
and/or cause damage to the door
and/or door trim panel. Such damage
is not covered by the Mercedes-Benz
Limit Warranty.

Damaged seat belts must be replaced.
Contact an authorized Mercedes-Benz
Center.

Warning!

G

To prevent possible personal injury, always

keep hands and fingers away from the door

openings when closing the doors. Be espe-

cially careful when small children are

around.

Before closing doors, make sure there is no

possibility of someone getting caught in a

door during closing.

Warning!

G

When leaving the vehicle, always remove the

SmartKey or SmartKey with KEYLESS-GO*

from the starter switch, take it with you, and

lock the vehicle. Do not leave children unat-

tended in the vehicle, or with access to an

unlocked vehicle. Unsupervised use of vehi-

cle equipment may cause an accident

and/or serious personal injury.

i

Opening a door causes the windows on
that side of the car to open slightly.
They will return to the up position when
the door is closed.

i

A warning sounds and the message

Turn off lamps

appears in the multi-

function display if the vehicle’s exterior
lamps are not switched off

ț

with the SmartKey removed from
the starter switch and

Advertising