Mercedes-Benz C-Class 2001 COMAND Manual User Manual
Page 165
163
Introduction
Audio
Telephone
Navigation
Index
Info Services and
system settings
Route guidance
1
Name of the street onto which you should turn or
distance from destination
2
Arrow indicating the driving direction,
other symbols are also possible: arrow indicating
the direction to the destination, symbol for new
calculation of a route or destination flag
3
Name of the street on which you are travelling
4
The following may be displayed:
• Distance bar to turn-off
• Distance to the next turn in miles
• Messages:
“OFF MAP” – the vehicle is located outside of the
digitized map area
“OFF ROAD” – the vehicle is located on a road
which is not digitized
“DEST AREA” – the vehicle is approaching the
destination, the destination area is not digitized
“CALC. ROUTE” – a route is being calculated
“NEW ROUTE” – an existing route is being
recalculated
“NO ROUTE” – system is unable to calculate a route
5
Activates the map
While route guidance is in progress it is also
possible to activate the map by pressing
.
6
Marking a way point, page 181
7
Mixture of map and symbol display, page 178
8
Activates the symbol display
While route guidance is in progress it is also possible
to activate the symbol display by pressing
.
9
Selecting map orientation:
North orientation (North-up) or direction of travel at
the top (Heading-up), page 180
10
Current map scale
11
Symbol for the current vehicle location with respect
to route
12
Destination flag
Route guidance is visual with screen displays and
acoustic with voice outputs.
You can select the following screen displays during
route guidance:
• Symbol display – always appears after a route has
been calculated
• Map display – activate the map with menu field (5),
switch back with menu field (8)
• Mix – before the vehicle makes a turn the COMAND
switches automatically to the symbol display, and
the map is displayed again once the turn has been
completed
In the map display, menu fields (6), (8) and (9) are
removed after 15 seconds. Turn the right-hand rotary/
pushbutton
to display the menu field again.