Connecting or disconnecting implement safety – Modern AG 15' Raptor User Manual

Page 11

Advertising
background image

15’ Raptorrr - 11

connecting or disconnecting implement safety

• always shut the tractor completely down, place the transmission in park, and set the parking

brake before you or anyone else attempts to connect or disconnect the implement and tractor

hitches.

• DO nOt use a PtO adapter to attach a non-matching implement driveline to a tractor PtO.

use of an adapter can double the operating speed of the implement resulting in excessive

vibration, thrown objects, and blade and implement failure. adapter use will also change the

working length of the driveline exposing unshielded driveline areas. Serious bodily injury and/

or equipment failure can result from using a PtO adapter. Consult an authorized dealer for

assistance if the implement driveline does not match the tractor PTO.

• When attaching the implement input driveline to the tractor PtO, it is important that the

connecting yoke spring activated locking collar slides freely and the locking balls are seated

securely in the groove on the tractor PTO shaft. A driveline not attached correctly to the tractor

PtO shaft could come loose and result in personal injury and damage to the implement.

• Before operating the implement, check to make sure the implement input driveline will not

bottom out or become disengaged. Bottoming out occurs when the inner shaft penetrates the

outer housing until the assembly becomes solid-it can shorten no more. Bottoming out can

cause serious damage to the tractor PtO by pushing the PtO into the tractor and through the

support bearings or downward onto the PtO shaft, breaking it off. a broken drive line can cause

personal injury.

• On a fully-assembled unit, do not remove the transport bars until hoses are attached to the

tractor and the Wing Cylinders are filled with oil. Lower the wings slowly and carefully. Keep

bystanders away during operations.

• never unhitch without using the tongue Jack. the tongue is very heavy. attempting to lift the

tongue without using the tongue Jack could cause strains or other injury. allowing the tongue

to fall suddenly and unexpectedly could result in crushing injury. use the tongue Jack for lifting

the implement only. Overloading the tongue Jack can cause failure with possible serious bodily

injury or even death.

• to prevent tipping of implement when stored in folded position, use carrying wheels or

adequate stands on center frame.

safety section

Advertising