Old Town Saranac Seatback Kit - Manual (Page 3)

Saranac Seat
Back Kit
Instruction 125 Gilman Falls Road
Building B
Old Town, ME 04468 USA
800-8-KAYAKS
www.oldtowncanoe.com
Please read kit instructions carefully prior to installation.
Many of our kit installations can be viewed at
www.youtube.com/oldtowncanoeandkayak
Rev. Original
Issue Date: 11/29/2010
Doc. # K-01.1331.1225
Page 3 of 5
3. Next find the Cleat Clam (D) and rest it in the pocket on the right side of your seat with the high end facing the
bow as shown in Fig# 5, using the clam cleat as a jig drill two holes with a 13/64” drill bit and install the two
Rivets AA68D (E) and pop the rivets with a pop rivet tool as shown in Fig# 6.
Fig# 5 Fig# 6
4. Take the rope that is attached to the seat back (A) on the right side and feed it threw the cleat clam (D) on the
right side of the seat, Locate the seat adjustment ball (C) then feed the same end of the rope threw it and tie a
knot at the end of the rope as shown in Fig# 7.
Fig# 7