Old Town Canoe Anchor - Manual (Page 2)

Canoe Anchor Kit
Installation
Instruction 125 Gilman Falls Road
Building B
Old Town, ME 04468 USA
800-8-KAYAKS
www.oldtowncanoe.com
Please read kit instructions carefully prior to installation.
Many of our kit installations can be viewed at
www.youtube.com/oldtowncanoeandkayak
Rev.Original
Issue Date: 11/29/2010
Doc. # K-01.1331.2028
Page 2 of 4
2. Find the center of the four marks you made in Fig# 2 and mark it, this is were you will need to drill your hole
with the hole saw as shown in Fig# 3. Insert the Anchor Lock Flush Mount (A) into the hole you drilled as
shown in Fig# 4
Fig# 3 Fig# 4
3. Now use your 13/64”drill bit to drill the four holes for the AA611D Rivets (C) as shown in Fig# 5. Insert the
AA611D rivets (C) into the holes you drilled and then pop the rivets with a pop rivet tool making sure to add
backup washers (D) to the under side of each rivet as shown in Fig# 6.
Fig# 5 Fig# 6
Drill on Center Mark
Backup Washers