Power Plate pro7HC - Manual (Page 10)

En
gl
ish
Maintenance
WARNING: THE MACHINE
CONTAINS NO USER-SERVICEABLE
PARTS. PLEASE CONTACT AN
AUTHORISED POWER PLATE ®
SERVICE PROFESSIONAL
FOR ANY MAINTENANCE OR
TROUBLESHOOTING NOT
OTHERWISE DESCRIBED BELOW,
OR PERSONAL INJURY OR DAMAGE
TO THE MACHINE COULD RESULT.
CAUTION: Any changes, modifications,
or unauthorised maintenance performed
to or on the machine could void the
product warranty.
Always unplug the machine and let stand
for at least one minute before performing
any maintenance.
Clean the machine only with a moist cloth.
Do not use sharp objects, bristles, scrubs,
or acid-based detergents, because this
will damage the lacquer finish.
Do not spray any cleaning solution directly
onto the machine. Instead, moisten a cloth,
then apply to the machine.
On plastic components, use only polishes
specifically designed for plastic.
Use a soft brush, not a cloth, to clean the
platform, including the contoured mat.
Clean electrical components only with
a dry cloth, in order to avoid the risk of
shock or damage to the components.
Troubleshooting
Always unplug the machine and let stand
for at least one minute before performing
any troubleshooting.
If the machine is not operational and the
console display is not illuminated, check
the power connections to the machine.
If all power connections are proper,
please check the circuit breaker or fuse
for the electrical outlet that is supplying
power to the machine in order to ensure
that the outlet is receiving electrical
power.
If the console display is illuminated, but
the platform will not vibrate, unplug the
machine, wait at least one minute, then
check the connection to the machine’s
motor, located under the base of
the machine.
If the machine makes a rattling noise,
unplug the machine, wait at least one
minute, then check to make sure that
the feet are properly tightened.
DANGER: Power Plate strongly
recommends that the user not try to
resolve any electrical issues regarding the
power source to the machine by oneself.
Instead, power plate strongly recommends
that the user contact a licensed,
professional electrician to conduct any
examination and make any necessary
repairs. Otherwise, serious personal injury
or property damage
could result.
APPLIED PARTS: applied parts are not
intended to deliver heat during normal
use. The maximum temperature for
applied part may be up to 43degrees
Celsius / 109.4 degree Fahrenheit.
Applied Parts:
• Platform
• Handlebars
Power On / Off :
• To Power On the Machine: Press the
rocker switch located on lower back of
the column to indicate “I” position.
• To Power Off the Machine: Press the
rocker switch located on lower back of
the column to indicate “0” position.
Accessories
Pro7HC Accessories
• Straps Set (2pcs)
• Handle Grips (2pcs)
• Exercise Mat
• Protection Cover
• Power Cord
• DVD
• Poster
• Step Deck (option)
• Foam Deck (option)
• Power shield (option)
!
!
•
•
•
•
•
•
•
•
•
!
En
gl
ish
19
Pro7HC Touchscreen controls
The pro7HC software is organized in four exercise modules: Complete program, Physical Rehab , Manual
Mode & Single Movements
The home page allows a quick access to 4
different exercise mode as:
• Complete program
• Physical Rehab
• Manual Mode
• Single Movements
Home page
Press the middle of Power Plate Logo
on the main screen can access to the
language setting page
• English
• Spanish
• Germany
• Chinese
Language Settings
Complete Program Physical Rehab
This button takes you to the complete
program module. The exercise are
broken down into 3 areas.
• Neuro Health
• Pain Relief
• Common Condition
This button takes you to the Physical Rehab
mode. It is broken down into 8 areas.
• Shoulder • Elbow / Wrist
• Hips • Knee
• Cervical Spine • Thoracic Spine
• Lumbar Spine • Ankle / Foot