ProgressiveRC PM3-75 User Manual

ProgressiveRC Power suppliers

Advertising
background image

OEM Installation of the PM3 Series Power Center

Select a mounting location near the shore power and battery
(batteries).

- Do not mount in an area where the owner may store items, as
this
could reduce the clearance requirements, obstruct ventilation
openings and affect the efficient operation of the converter.
- Do not install close to appliances that are a source of heat or
water
(such as water heaters, furnaces, and under refrigerators). It is not
designed for mounting in wet locations. It must be protected
from direct contact with water.

This equipment employs components that tend to produce arcs or

sparks.

To prevent fire or explosion,

DO NOT INSTALL IN COMPARTMENT CONTAINING

BATTERIES OR FLAMMABLE MATERIALS (LP gas).



FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,
REPLACE ONLY WITH THE SAME TYPE AND RATING FUSE.
The fuse rating which the manufacturer suggests for the output
fuses
will be marked on the unit. Replace only with same type and rat-
ing.

During the manufacturing process, be sure that all converter
openings are protected from debris falling into the unit. This is a
non-warranty item
.

NOTE: If the reverse battery protection fuses are blown during
installation, be sure that the battery has been connected properly,
then
replace the fuses with ATC “Littelfuse ” Type 257 with the same
rating as the original.

General Consumer Information

Reverse Battery Protection

This feature prevents permanent damage to the converter from
an incorrect battery connection.

Automatic Cooling Fan
The fan is variable speed and current controlled.

Electronic Current Limiting
Automatically shuts down power during overload or short-circuit

conditions.

Automatically returns to normal operation after conditions are cor-
rected.

DC Fuses
Reverse battery protection fuses; replace only with

ATC “Littelfuse ” Type 257 fuse.


Lightweight

- 35 A unit weighs only 9.03 lbs.
- 45 A unit weighs only 11.20 lbs.
- 55 A unit weighs only 11.57 lbs.
- 65 A unit weighs only 14.33 lbs.
- 75 A unit weighs only 14.88 lbs.

Advertising
This manual is related to the following products: