Optional accessories – Reliance Controls Pro/Tran User Manual

Page 13

Advertising
background image

11


Optional Accessories

Power Inlet Boxes

Ideal for installations where the house electrical panel is located
indoors. No need to run the power cord from the generator to the
transfer switch through a door or window. This weather-tight power
inlet box can be mounted on the exterior of the house. Run wiring
through the wall from the inlet box to the transfer switch installation
inside. The generator power cord may then be plugged into the
power inlet box.

Catalog#

Connector

configuration

Inlet description

For use with models

PB15 5-15

3-wire

weather-tight male

15114A

PB20 L14-20

4-wire

weather-tight male

20216A

PB30

L14-30

4-wire weather-tight male

All 30A Models

PB31 L5-30

3-wire

weather-tight male

30114A

PB50 CS6364

4-wire

weather-tight male

All 50A Models

Flush Kits

Hinged Covers

Power Cords

These heavy duty cord sets are the connecting link
between the generator and the Reliance transfer switch or
the power inlet box. The 4-wire locking plug and connector
match up with the power inlet on each Reliance transfer
switch and with the inlet on the power inlet box. Most
portable generators suitable for 120/240 full-power

operation are supplied with either a 20-amp or 30-amp, 4-wire locking receptacle that
accepts the locking plug and connector on each end of the cord set.

Watt Meter Panel

Kits for flush mounting
all Pro/Tran® indoor
transfer switches are
available. Order KF6
for the four- and six-
circuit models and
KF10 for the eight- and
ten-circuit models.

High-impact clear
plastic covers protect
from accidental con-
tact with transfer
switch.

Order CK6 for

the four- and six-circuit
models and CK10 for
the eight- and ten-
circuit models.

Watt Meter Panel WP7500 may replace the blank cover on
any indoor suffix B Pro/Tan® model to provide important
information on the output from a 20A or 30A, 125/250VAC
generator. Accuracy is plus or minus 3%.

Advertising