Rice Lake 880 Performance Series Panel Mount Indicator/Controller - Adapter Panel Installation - Manual (Page 2)

2 Adapter Panel Installation
2. Use the adapter plate as a template to mark the holes to be drilled for the screws. Ensure the plate is
centered over the opening and the larger hole is on the right side.
Existing Panel
Mark holes to be drilled
Adapter Plate
Figure 3. Adapter Plate as Template
3. Drill the holes.
4. Align adapter plate (gasket side toward panel) to the holes drilled in the panel and secure with screws,
sealing washers and nuts. Torque to 8 in-lb.
Adapter Plate
Gasket
Screws and Washers
Nuts
Existing Panel
Figure 4. Install Adapter Plate