CREATIVE NX Pro - Manual (Page 13)

Installing Creative WebCam NX Pro 1-3
5. Place your Creative WebCam NX Pro on top of your computer monitor or other flat surface. For
LCD flat panel monitors or notebook computers, use the integrated hinged lever to balance the
camera. See Figure 1-2.
For Windows 98/98SE and Windows Me only
1. Connect the Creative WebCam NX Pro’s USB cable to an available USB port on your computer
(Figure 1-2). Windows automatically detects the device.
i.
If you are prompted to insert the Windows 98 or Windows Me CD, replace the Creative
WebCam NX Pro Installation CD with the appropriate CD.
Note: Windows 98 is available in various editions. Be sure to use the correct edition for your
system.
ii. In the Insert Disk dialog box, click the OK button.
iii. Follow the instructions on the screen.
If you have a microphone,
plug it into your computer’s
microphone connector. For
further information, please
read the documentation for
your microphone connector.
Figure 1-2: Connecting Creative WebCam NX Pro to your computer
USB port
Hinged
lever