Rice Lake 920i Deep Enclosure User Manual
Deep enclosure installation instructions, 920i, Programmable hmi indicator/controller
February 2011
83810
920i
®
Programmable HMI Indicator/Controller
Deep Enclosure Installation Instructions
PNs 82455, 82456, 82457, 82458, 82459, 82460
This document contains drawings, replacement parts
lists, and instructions for installing deep enclosure
models of
920i
indicators. See the
920i
Installation
Manual, PN 67887, for general installation and
configuration and calibration information.
Figure 1 shows the outside dimensions of the deep
enclosure.
The
920i
has no on/off switch. Before
opening the unit, ensure the power cord is
disconnected from the power outlet.
•
Use a wrist strap to ground yourself and protect
components from electrostatic discharge (ESD) when
working inside the indicator enclosure.
•
This unit uses double pole/neutral fusing which could
create an electric shock hazard. Procedures requiring
work inside the indicator must be performed by
qualified service personnel only.
•
The supply cord serves as the power disconnect for the
920i
. The power outlet supplying the indicator must be
installed near the unit and be easily accessible.
Figure 1. Deep Enclosure Dimensions
Warning
Caution
8.51"
10.76"
5.25"
To be the best by every measure