Rice Lake 920i Hardware and Software Compatibility Matrix - Manual

230 W. Coleman St. • Rice Lake, WI 54868 • USA
U.S. 800-472-6703 • Canada/Mexico 800-321-6703 • International 715-234-9171 • Europe +31 (0)26 472 1319
www.ricelake.com www.ricelake.mx www.ricelake.eu www.ricelake.co.in m.ricelake.com
Rice Lake Weighing Systems is an ISO 9001 registered company.
© Rice Lake Weighing Systems Specifications subject to change without notice.
920i Programmable HMI Indicator/Controller
Hardware and Software Compatibility
Table 1 shows the evolution of 920i CPU board revisions and provides the recommended boot monitor, minimum
core, and maximum core.
Table 1. Hardware and Software Compatibility
CPU Board Revision Recommended Boot Monitor Minimum Core Maximum Core
A-D 1.00 1.00.00 2.08.00
E 1.10 1.00.00 4.00.00
F-G 1.12 1.00.00 4.01.00
H 1.13 3.14.00 4.01.00
Note
• CPU board revision A-D was the initial release and covered versions 1 and 2.
• Revision E was the release of version 3, which had a minimum CPU revision.
• Revision F-G was the final version of the old CPU hardware build.
• Revision H boards are of the new design for the replacement of PN 67612. The new CPU board is

PN 109549 and requires a minimum core of 3.14.00.
• Boot Monitor v1.13 will run on revision G or H boards.
• If using a 920i in conjunction with iQUBE 2 , use version 3.x and iRev 3; If using in conjunction with iQUBE 2
or no iQUBE 2 , use version 4.x and iRev 4.
November 2014