Rice Lake Bariatric Handrail with Chair Seat (250-10-4) - Operation Instructions - Manual (Page 8)

4 Bariatric Handrail Scale Operation Manual
Adjusting the Scale Feet
There must be adequate clearance between the scale base and the floor so screw each foot out counterclockwise
two full turns. This will ensure that there is enough clearance between the scale base and the floor.
Gently set the scale base down to the floor. There should be minimal clearance between the scale base and the
floor without having the scale base actually touching the floor. By not having clearance around the scale base
will cause inaccurate weighments.
It’s also important to make sure that the scale is completely level. Gently press down on all corners of the scale
base to ensure that there are no high spots or rocking of the scale base.
Unfold Platform Seat
The Digital Bariatric Handrail Scale comes with a fold down seat for those patients who need to be weighed
while seated. To unfold the seat, simply pull down on the seat bottom as shown in Figure 3-2.
Figure 3-2. Unfolding the Seat