Rice Lake Belt Scales User Manual
Shaft encoder to pulse input card
230 W. Coleman St. • Rice Lake, WI 54868 • USA
U.S. 800-472-6703 • Canada/Mexico 800-321-6703 • International 715-234-9171 • Europe +31 (0)26 472 1319
www.ricelake.com www.ricelake.mx www.ricelake.eu www.ricelake.co.in m.ricelake.com
Rice Lake Weighing Systems is an ISO 9001 registered company.
© Rice Lake Weighing Systems Specifications subject to change without notice.
Shaft Encoder to Pulse Input Card
Table 1. Pulse Input Card Wiring
Wire Color
Name
Connector J1
Black
COM
Pin 2 (GND)
Red
+VDC
Pin 1 (+12V)
White
A
Pin 3 (Pulse IN)
.275 +/- .25
1
6.00 +/- .25
Magnetic Coupler
PN 152247
Not included in kit
Shaft Encoder
PN 152245
Cable, 15 ft
PN 152249
Note
The shield wire should be wrapped around foil and secured to the ground clamp in the indicator enclosure.
Figure 1-1. Shaft Encoder Cable Kit (PN 152626)
153018 Rev A
October 2014