Rice Lake SC-3 PCA Sofware Update Procedure - Manual (Page 2)

2 Software Update Procedure
3. Open a terminal program.
Figure 2. Serial Port Setup
4. Configure to the following:
• Baud Rate: 38400
• Data Bits: 8
• Parity: None
• Stop Bits: 1
• Flow Control: XON/XOFF
5. Type: {00FF09=0199}, then press enter. This command will access the boot-loader program within the
SCALECORE. “bLOAd” displays on the MSI-3460 and the Scalecore Boot Loader menu will appear on
the terminal screen
Scalecore Boot Loader Menu MSI-3460 Display
Figure 3. Access Bootloader Within Scalecore