Rice Lake RL150-10-5 Digital Physician Scale Technical & Operating Instructions - Manual (Page 13)

Rice Lake Digital Physician Scale — Scale Operation 9
The keys on the front panel display are very sensitive so only a gentle pushing motion is required.
The scales have the capability of performing different operations beyond just calculating weight. The various
operating instructions are described below.
4.1 Weighing
Use the following steps to weigh a person.
1. Press the
On/Off
key to turn on the scale and
0.0
will appear on the display along with
ZERO
on the upper
display.
2. When the person steps on the scale the display shows the person’s weight. The
LOCK
annunciator is on in
the upper display and beeps to indicate the end of the weighing process.
3. To change the display from Kg to Lb and vice-versa, press the
LB/KG
key.
4. To turn off the scale, press and hold the
On/Off
key until
OFF
appears on the display.
4.2 Hold/Release Function
Use the following steps to use the Hold/Release function:
1. When the person is on the scale, press the
Hold/Release
key.
2. When the person steps off the scale, the weight and the
HOLD & LOCK
annunciator will remain on the
display.
3. At this stage the
Zero
key will not work. The only way to return to zero from here is to press the
Hold/
Release
key one more time.
Note
Pressing the Hold/Release key prior to a person getting on the scale will also work.
Up/Down Arrows Used to adjust height input (0.5 in/0.5 cm) while in BMI mode.
Note
Key Name Function
Table 4-1. Rice Lake Digital Physician Scale Key Functions