3 setting up your scale – Rice Lake Dual Ramp Wheelchair Scale (350-10-3) - RL350-10 Operation Instructions User Manual
Page 8
4
Rice Lake Digital Wheelchair Scale Operation Manual
3.3
Setting Up Your Scale
Move the scale into the area where the weighing process will occur. It’s recommended to place the scale on a
hard, level surface for the most accurate weighments. Thin carpeting is fine but not recommended.
1. Locate the operator’s manual from inside the box and set aside as it will provide instructions on the
proper scale removal and set up.
2. Using two people, remove the scale out of the packaging material that it came in by lifting the scale out
of the box by the scale base as shown in Figure 3-2.
Note
DO NOT lift the scale out of the box by its handle as this can cause the hinges to break or affect the
scale operation.
Figure 3-2. Lift the Scale From the Box
3. Stand the scale on its side as shown in Figure 3-3, so that the plastic packaging material can be removed.
Figure 3-3. Remove Plastic Covering Material