Rice Lake Ohaus Explorer Pro High Capacity Quick Start Guide - Manual

Quick Start Guide Explorer
®
Pro-HC
Ohaus Corporation www.ohaus.com i Explorer
®
Pro-High Capacity Quick Start Guide
PREPARATION FOR USE
Place stainless steel weighing pan atop black
rubber pads.
Power
Check that local line voltage matches voltage
printed on the scale’s power adapter. If not,
do not connect the scale to the power supply.
Contact an Ohaus dealer.
To use Weigh
Below hook,
remove the
protective cover
on the bottom of
the balance.
Level the scale:
Adjust feet so bubble is centered.
SELECTING THE LOCATION: Place on a firm, steady surface with sufficient space.
Avoid excessive air current, vibrations, heat sources, or rapid temperature changes.
SAFETY PRECAUTIONS
For safe and dependable operation of this product, observe the following safety
precautions:
• Verify that the input voltage printed on the power adapter and the plug type matches
the local power supply.
• Be sure the power cord does not pose an obstacle or tripping hazard.
• Disconnect the product from power supply when cleaning.
• Do not operate this product in hazardous or unstable environments.
• Do not drop loads on the pan.
• Use only approved accessories and peripherals.
• Operate the product only under ambient conditions specified in the Instruction Manual.
• Service should be performed by authorized personnel only.
Leveling
Feet
Leveling
Bubble