4_g500 user manual_safety instructions_02, G500 s er ies, Safety instructions – Rice Lake GoDEX G500 Direct Thermal/Thermal Transfer Label Printer User Manual
Page 4
Advertising
SAFETY INSTRUCTIONS
Please read the following instructions carefully.
Keep the equipment away from humidity.
Before you connect the equipment to the power outlet, please check the voltage of the power
source.
Make sure the printer is off before plugging the power connector into the power jack.
It is recommended that you connect the printer to a surge protector to prevent possible
transient overvoltage damage.
Be careful not to get liquid on the equipment to avoid electrical shock.
For safety and warranty reasons, ONLY qualified service personnel should open the equipment.
Do not repair or adjust energized equipment under any circumstances.
G500 S
er
ies
Safety Instructions
P/N : 920-014011-00
Advertising