Rice Lake Ishida AstraLink - Manual (Page 8)

3
If you have not already connected the Astra to your PC using the cable provided, now is the
time to do so.
Plug one end of the cable into the 9-pin socket on the left side of the Astra, and plug the other
end into an unused serial port socket on your PC. If the PC port is labeled, make a note of the
port number.
Next, turn on the Astra and allow it to start.
Leave the Astra in this state, go back to your PC, and click the Next button to move to the next
step.
In this step, you specify which serial port you used to connect the Astra to the PC.
If you are unsure, leave the default setting. If communications does not work you can return to
this step and try another serial port.
Click the button indicating the correct serial port, then click the Next button to move to the next
step.