Rice Lake ITCM SS Isolated Tension Cell Module - Manual (Page 5)

3
Multiple cell suspension configurations commonly involve three or four load cells.
One advantage to using three suspension points is that even weight distribution is
inherent in this configuration. Support points should be equally rigid and deflect by
the same amount when loaded. Otherwise, one or more of the cells may be
overloaded. For maximum stability, attach suspension rods at or above the filled
vessel’s center of gravity. In situations where there is a potential for vibration,
agitation, wind, or seismic activity, install bumpers or horizontal check rods to
check the sideways motion of the vessel. See our Weigh Modules & Vessel Weighing
Systems manual, PN 43918, for further details.
All suspended vessel weighing systems must be protected
by safety check rods, chains, or other means to prevent
damage or injury in the event of a failure.
Three Cell Suspension
Four Cell Suspension
! Warning