Rice Lake JB8SPT TuffSeal Signal Trim Junction Box - Manual (Page 6)

2 TuffSeal Installation Guide
2.0 TuffSeal Truck Scale Version Mounting Procedure
The junction box should be mounted in a location that is convenient for servicing and away from standing water.
Try to mount the enclosure in a location so that the load cell cable need not be cut, nor length added. Load cell
output is temperature compensated for the supplied cable length. Altering the length can change the cell's signal
output.
Depending on the mounting surface, the enclosure is attached using four pan-head screws, bolts, or other suitable
fasteners (not included). Figure 2-1, shows the dimensions for mounting the enclosure.
10.75”
11.50”
8.25” 6.00”
5.25”
(8) 3/8” NPT Cord Grips - Cable Diameter 0.157” - 0.314”
(2) 1/2” NPT Cord Grips - Cable Diameter 0.272” - 0.472”
Note: with reducing glands, the cable diameter changes
to 0.295” - 0.353”
Recommended screw size 1/4 - 20NC
Figure 2-1. JB8SP and JB8SPT Enclosure Dimensions