Figure 3. mount enclosure box, Figure 4. wiring diagram – Rice Lake Livestock Solutions - AC/DC Power Supply Adapter Box Kit User Manual
Page 2
2
AC/DC POWER SUPPLY ADAPTOR BOX KIT
1. Place mounting bracket assembly on the outer beam of the bottom frame on the scale in desired location. Angle
bracket should extend past the front of the beam and backplate extensions should be flush with back of beam.
2. Tighten bolts to secure to frame. Ensure they are tight enough to resist movement when scale is in use.
When ordering a complete package, the enclosure box will be assembled to the mounting bracket.
Skip to Step 4.
3. Mount the enclosure box to the mounting bracket using the bolts and washer supplied.
Figure 3. Mount Enclosure Box
Figure 4. Wiring Diagram
Note
Scale Frame
Bolt and Washer
Enclosure
Mounting Bracket
Power Cord
Load Cell Cable Conduit
To Weighcenter
Through Frame
to J-Box
Conduit Elbow
Existing Conduit Elbow and
Conduit to Weighcenter