Important safety information – Chicago Electric 18 Volt NiCd Quick Charger 68859 User Manual

Page 2

Advertising
background image

Page 2

For technical questions, please call 1-800-444-3353.

Item 68859

Specifications

Charger

120V~, 60Hz. 50W Input

7.2-24VDC Output

1 Hour Charge Time

Battery Type

18V, 1500mAh, NiCd

(

SKU 68860, sold separately)

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is used to alert you to

potential personal injury hazards. Obey all safety messages

that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

IMPORTANT SAFETY INFORMATION

Read all safety warnings and instructions.

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.
The warnings, precautions, and instructions discussed in this instruction

manual cannot cover all possible conditions and situations that may occur.

It must be understood by the operator that common sense and caution are factors

which cannot be built into this product, but must be supplied by the operator.

1.

Use on dry, flat, fireproof surface

only. The Charger gets hot during

use. The Charger’s heat can build

up to unsafe levels and create a

fire hazard if it does not receive adequate

ventilation, due to an electrical fault, or if it is

used in a hot environment.

2. Do not place the Charger on a flammable

surface. Do not obstruct any vents on

the Charger.

Especially avoid placing

the Charger on carpets and rugs; they

are not only flammable, but they also

obstruct vents under the Charger.

3. Place the Charger on a stable, solid,

nonflammable surface (such as a stable

metal workbench or concrete floor) at

least 1 foot away from all flammable

objects, such as drapes or walls.

Advertising