Rice Lake MSI-8000 RF Remote Display - ScaleCore 2 Database Program (Sc2Db) User Manual
Page 8
Advertising
4 ScaleCore 2 Database Operator’s Manual
Typical serial connection parameters are shown in Figure 4-2.
Figure 4-2. Communications Dialog (RS-232)
1. Select the serial port name of the local computer port that the ScaleCore device is connected to.
2. Press OK to open the connection.
3. Ethernet and Wi-Fi (802.11) communications require the IP address and port number of the ScaleCore device.
The address is specific to the device installation. The port is typically 2101.
Figure 4-3. Communications Dialog (TCP/IP)
Note
The last used connection parameters will be automatically filled in for convenience.
Advertising