Rice Lake Star LC-7211 Form Printer - Manual (Page 67)

Manual sheet feeding 59
Manual sheet feeding
You can use the following procedure to manually feed cut-sheet paper into the
printer.
❏
Make sure that there is no fanfold paper in the printer. If there is, use the
procedure under “Parking fanfold paper” on page 14 to park the fanfold
paper and prepare for manual sheet feeding.
❏
Set the release lever on the back of the printer to the cut-sheet position.
❏
Set the adjustment lever to the value that matches the thickness of the paper
you are using. The setting for normal paper is 1. Set the lever to a larger
value for thicker paper, or to a smaller value for thinner paper.
Release lever
Fanfold
Cut-sheet
7
5
3
1