Rice Lake RL1900 Series - Manual (Page 3)

1
1. Introduction
The RL1900 Series Mounting Assemblies are designed to accommodate normal
vessel expansion in all directions while still exercising self-checking capabilities.
The center-pivoting, tension loading design incorporates spherical washers and a
unique pivoting trunnion that is self-restoring to its center position. Vessel leveling
and adjustment can be done easily with the center loading bolt, and the load cell can
be replaced without raising the vessel.
The mount is available in capacities from 1,000 to 10,000 lb. It features 304 stainless
steel construction with hermetically sealed load cells, making it ideal for rigorous
washdown and corrosive environments.
The installation should be planned by a qualified structural engineer to avoid
product failure. Each installation is unique, and this booklet is meant to serve only
as an overview for installation of the RL1900 Series Mounting Assembly.