0 installation, 1 setup and checking of functions, Installation – Rice Lake TP Series, Rice Lake Weighing Systems - Software Development Kit User Manual
Page 8
4
2.0
Installation
The following section contains information regarding the installation of the TP Series
balance.
2.1 Setup and Checking of Functions
1. Invoking the Function: press and hold down the
Function
Key until the
indicator displays “
,” then release the key. The function setup mode is
activated and the first item, [
(Bar graph) 1] appears.
Figure 2-1. Invoking the Function
2. Selecting the next item: press the
Function
Key. The
indication changes to the next item, [
(Limit
function)].
3. Selecting an item: pressing the
Function
key advances
the function items at the rate of one item per press.
4. Changing the content of an item: select the item to be changed with the
Function
key. Each press of the
Zero/Tare
key changes the last digit. Select
the desired digit.
Figure 2-4. Changing the Content of an Item
Figure 2-2. Selecting
the next item
Figure 2-3. Selecting
an item