Ring Communications DNA300 - Manual (Page 14)

DNA300 OPERATIONS MANUAL 14 2006/06/13
CALL NUMBERS
All intercom stations are assigned call numbers in the Ring intercom central exchange.
The DNA300 interface assigns a Push Button Address to each of the intercom call number for the external
device. This assignment is stored in the DNA300 and may be listed with the command LCN from the PC
connected to the DNA100.
The call number may be 2,3 or 4 digit decimal.
The Push Button address may be 1,2 3 or 4 digit HEX.
The Button may be removed from a a call number by entering 0 as the address.
>LCN
cr
Call Number <10-9999/*> : 100-110
cr
Intercom Button NetSub
Call Number Address Address
============ ======== =======
101 A1 801
103 A3 803
104 A4 804
>
Note! The NetSub is the Network Address and Line Equipment Number of the
intercom station. This information is updated when a call is received
from the intercom-station.
BUTTON ADDRESS
Assign a Push-Button to an intercom station.
PROGRAMMING
The following commands are used for this feature.
SBA
Set Button Address
LCN List Call Number
Example: Set Button address for intercom call number 101 to address A1.
>SBA
cr
Call Number <10..9999> : 101
cr
Button Address <0..FFFF> : A1
cr
>LCN
cr
Call Number <10-9999/*> : 101
cr