Ring Communications DS16 OPERATIONS MANUAL - Manual (Page 11)

March 2012 Operations Manual DS16
CALL NUMBERS
All intercom stations are assigned call numbers in the Ring intercom central exchange.
The DS16 interface assigns a Push Button Address to each of the intercom call number for the external
device. This assignment is stored in the DS16 and may be listed with the command LCN from the PC
connected to the DNA100.
The call number may be 2,3 or 4 digit decimal.
The Push Button address is 1 digit HEX.
The Button may be removed from a a call number by entering 0 as the address.
>LCN
cr
Call Number <1-9999/*> : 10-20
cr
Intercom Button NetSub
Call Number Address Address
============ ======== =======
11 1 801
12 2 802
13 3 803
14 4 804
>
Note! The NetSub is the Network Address and Line Equipment Number of
the intercom station. This information is used for testing only.
Page11
Ring-Master