Sage Citrus Press 800CPUK - Manual (Page 14)

13
CaRe & CleanIng
StoRage
Store the cleaned and reassembled Citrus
Press in an upright position in a cool, dry
place. Do not place any items on top of the
Citrus Press while stored.
• Always ensure that the Citrus Press is
turned OFF at the ON/OFF button and
the plug is removed from the power
outlet before cleaning, disassembling,
assembling and storing the appliance.
• Follow these instructions to clean all
surfaces or parts that come into contact
with food during juicing.
• For easy cleaning immediately after each
use rinse removable parts under warm
water to remove wet pulp. Allow parts to
air dry before reassembling.
• For thorough cleaning after
disassembling the appliance, all
removable parts should be washed in
hot soapy water or on the top shelf of the
dishwasher. The motor base and juice
press arm should be wiped with a soft,
damp cloth. All parts should be dried
thoroughly before reassembling.
• Store the cleaned and reassembled
Citrus Press in an upright position in a
cool, dry place. Do not place any items
on top of the Citrus Press while stored.
note
Rinse or wash all removable parts
immediately after use. Dried citrus
pulp is difficult to remove and may
stain. If any staining does occur,
wipe the discoloured part(s) with
undiluted dishwashing liquid, rinse
and dry thoroughly.
note
Do not soak the stainless steel filter
or other removable parts in bleach.
Never immerse the motor base in
water or any other liquid. Do not use
harsh abrasives