Sage Smart Toast BTA820UK/BTA840UK - Manual (Page 10)

9
oPerATIng yoUr neW APPlIAnCe
Before first use, remove any packaging
material or promotional labels attached to
your toaster.
1. Insert the power plug into a 230V
power outlet then turn the power
on. The TOAST/CANCEL button
surround will illuminate in white.
The LED toasting progress
indicator will illuminate in red
from left to right, then align to the
selected browning setting
(indicated by the position of the
browning control slide).
The toaster will revert to stand-by
mode after 30 seconds if a button is
not pressed or the browning control
slide is not adjusted.
noTe
When using the toaster for the first
time, we suggest toasting on the
maximum setting without bread.
The toaster may emit a thin smoke
or distinct odor on initial use. This
is normal and not detrimental to the
performance of the toaster.
2. Place 1 slice of bread, 1 crumpet
or half a muffin only, into each of
the toasting slots. Ensure items for
toasting are not too large or too thick
to fit in the toasting slots.
The BTA820UK has a single browning
control slide and a row of function
buttons that simultaneously control the
two toasting slots.
The BTA840UK has dual independent
controls allowing each pair of slots
to work independently so you can
simultaneously toast to
different preferences.
3. Select the desired browning setting
by adjusting the browning control
slide on the front of the toaster.
The browning settings range from
'1' (lightest) to '5' (darkest). The
LED toasting progress indicator
will illuminate in red and align to
the selected browning setting (as
indicated by the position of the
browning control slide).
noTe
When using the toaster for the first
time, it is suggested to toast on
browning setting '3'. Various types of
bread and personal preference may
require a different browning setting.
For example, raisin toast and white
light-textured breads may require a
lighter setting, whilst heavier textured
breads may require a darker setting.
4. To start the toasting process, press
the TOAST/CANCEL button on
top of the toaster. The TOAST/
CANCEL button surround will
illuminate in red and the carriage
will automatically lower into the
toasting position and starts the
toasting cycle. As the carriage
automatically locks into position,
the QUICK LOOK™ button surround
will illuminate in white and the LED
toasting progress indicator (above
the selected browning setting) will
flash and start to gradually count
down (towards the left) indicating
the toasting progress.