Sage Smart Scoop BCI600UK User Manual

Page 15

Advertising
background image

14

PAge heAder.....

oPeratIng yoUr neW aPPlIanCe

manUal moDe

Start up
Unwind the power cord completely and

insert the power plug into a 230V outlet.
Press the POWER button to switch the

machine on. The POWER button will

illuminate white. The LCD screen will

default to the AUTO mode and selection

bar. The ice cream machine and LCD screen

will always revert to the last program or

setting that was used.
Ensure the machine is in manual mode by

pressing the manual timer arrow

buttons. The time will be displayed and the

arrow should point to MANUAL on the left

hand side of the screen.
To change the time that you wish to churn

and freeze, press either one of the manual

timer arrow buttons. On average, ice

cream will need about 50 minutes to churn

and freeze.

HarDneSS SeleCtIon

This is not available in the manual mode.

KeeP Cool In manUal moDe

The keep cool function will keep the frozen

dessert chilled and churned for the selected

duration of the machine operation. A red

light will illuminate around the button and

the LCD screen will display KEEP COOL

when this feature is selected. The paddle

will only operate if the unit detects that your

dessert has melted below the

pre - determined consistency.

aDDIng tHe IngreDIentS anD

StartIng oPeratIonS

a)

Set the time that you desire by pressing

the MANUAL buttons up or down

.

b)

Insert bowl and paddle into the chamber.

Add ingredients.

c)

Press START | PAUSE button for the

ice cream making process to start. The

light around this button will illuminate

red to indicate that the button has been

selected and the machine has started the

dessert making process.

d)

When the desired time has been

reached, the compressor and motor will

stop and READY will illuminate on the

LCD display.

e)

If the START | PAUSE button is pressed

during the cycle this will pause the time.

To resume the process press the button

again.

f)

If you need to reset the timer press and

hold the START | PAUSE button for 2

seconds and this will reset the timer.

g)

The timer can be adjusted at any time.

m

an

U

al

m

o

D

e

Advertising