Sage Kitchen Wizz Pro BFP800UK - Manual (Page 32)

31
Care, CleanIng & Storage
Care and CleanIng
When finished processing, switch the food
processor off at the power outlet and unplug
the power cord.
motor base
Wipe the motor base with a clean, damp
cloth after each use. Dry thoroughly with a
soft, clean cloth.
Processing bowl, lid and food pusher
Hand wash in hot, soapy water using a mild
detergent. Do not use a scourer or abrasive
cleaners as they will scratch the plastic
surface. The plastic parts may occasionally
be washed in the dishwasher (top shelf
only). It is not recommended on a regular
basis, as prolonged exposure to hot water
temperatures and harsh detergents will
damage and shorten the life of the plastic.
note
Do not place food pusher in the
dishwasher as the heat may deform it.
Processing 4 blade processor,
dough blade and discs
Hand wash the bowl and lid. Use the
cleaning brush accessory to scrub stubborn
foods off the blades and discs. The handle
end of the brush is designed for scraping.
To avoid accidental cuts, do not leave 4
blade processor or discs to soak in sudsy
water. The 4 blade processor, dough blade,
discs and spindle can also be washed in
the dishwasher (top shelf only).
note
The 4 blade processor cover can be
assembled onto the 4 blade processor
while it is placed in the dishwasher for
added safety.
Food stains and odours
Foods such as carrot may leave a stain on
plastic parts whilst other foods such as
garlic may leave a strong odour. To remove
either, soak the parts for 5 minutes in 2
litres of water with ½ cup lemon juice added.
Rinse and wash as normal.
Storage
• Ensure the food processor is switched off
and unplugged at the power outlet.
• Ensure all parts of the food processor are
clean and dry.
• Carefully grasp the 4 blade processor
using the spindle. The 4 blade processor
and mini processing blade, should be
stored in the storage box when not in
use. It is good practise to store the 4
blade processor inside its cover and
then inside the storage box. The mini
processing bowl can be stored inside the
main processing bowl when not in use.
• Place the lid on top of the processing
bowl but DO NOT turn clockwise to the
locked position.
• Place the food pusher, with the
measuring cup inserted, into position in
the feed chute.
• It is advisable not to store the food
processor with the processing bowl or
lid locked onto the processing bowl as
unnecessary strain will be placed on the
operating and safety switches on the
processing bowl and the motor base.
• Place the discs in the storage container
and store in a safe place out of the reach
of children to avoid accidental cuts. It is
not recommended to store the discs in a
drawer with other utensils.
note
The large chipper disc must be
placed in the back slot in the storage
container.