SINGER SES1000 FUTURA - Manual (Page 106)

0
HELPFUL MESSAGES
USB cable is not connected.
 Connect your PC to the sewing machine with USB cable.
Foreign particle is inserted into cord socket for foot control plug.
 Remove foreign particle.
Embroidery unit is installed with small hoop attached.
 Remove embroidery unit and small hoop and then re-
attach embroidery unit or remove small hoop and turn off
and on power switch.
Needle is lowered when starting embroidery sewing.
 Raise needle by rotating hand wheel toward you.
Foot control plug is pushed in and pulled out while sewing
patterns.
 Don’t touch the plug while sewing.
Needle thread breakage or incorrectly threaded condition is
detected.

Check threading.
On control panel
Sur le panneau de commande
En el panel de control
On PC screen
Sur l’écran de PC
En la pantalla de la PC
Messages are displayed with LED lamps above stitch pattern
numbers on the control panel and/or PC screen. When a
message is displayed, fix the problem following the instruction
in the message. The message will disappear, once the
problem has been fixed.
Helpful message reference guide
Guide de référence des messages d'aide
Guía de referencia de mensajes de ayuda