Chicago Electric Vacuum Blower 90981 - Manual (Page 7)

INSPECTION, MAINTENANCE, AND CLEANING
1. CAUTION: Always disconnect the Vacuum/Blower from its electrical supply
source before performing and inspection, maintenance, or cleaning.
2. Before each use, inspect the general condition of the Vacuum/Blower. Check for
broken parts, damaged power cord, and any other condition that may affect its
safe operation. If a problem with the Vacuum/Blower occurs, immediately
discontinue using the tool and have the problem corrected before further use.
Do not use damaged equipment.
3. Before each use, remove the Motor Housing (3) from the Container (20). Empty
all debris/liquid from the Container. Check to make sure the Bag (19) is clean. If
necessary, remove the Rubber Band (18) and Bag from the Ball Basket (17).
Clean the Bag. Then, replace the Bag, Rubber Band, and Motor Housing.
4. Do not use solvents to clean the Vacuum/Blower, as damage to the tool may
occur. To clean, use a damp cloth. If necessary, a mild detergent may be used.
Then, completely dry.
5. When storing, keep the Vacuum/Blower in a box or covered with a cloth cover.
SKU 90981 Page 7
PARTS LIST
PART # DESCRIPTION QTY PART # DESCRIPTION QTY
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES
ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO
MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF
THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THat ALL
REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECH-
NICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
REV 03/04
1
2
3
4
5
6
7
8
9
10
11
1
7
1
1
1
4
2
1
1
1
1
Switch
Screw (5 x 18)
Motor Housing
Power Cord
Motor
Screw (3 x 8)
Screw (4 x 16)
Motor Fixer
Bushing
Impeller
Washer
1
1
6
1
1
1
1
1
1
1
1
12
13
14
15
16
17
18
19
20
21
22
Screw Cap
Worm Cover 8mm
Screw (4 X 18)
Stator
Ball
Ball Basket
Rubber Band
Bag
Container
Hose
Hose Attachment