SINGER 580 ROTARY STEAM PRESS - Manual (Page 23)

21
Care & Maintenance
1
2
3
4
WINDING THE IRONING COVERS
Note: All layers must project evenly and be centered at both
sides of the ironing roller so that the roller remains open for
ventilation.
1. Unwind the jute cover (C) approximately 10 inches
(25cm).
2. To wrap the ironing roller, press the buttons of steam set-
tings min 17A and maximum 17C. This means that the
ironing roller will remain in the lowered position even
when the foot pedal is operated.
3. The padding cover has a smooth and rough side. Only
one short side of the cover is trimmed. Place the
trimmed short side on the jute cover with the rough side
upwards. Press the foot pedal and wind the padding
cover onto the ironing roller.
4. When winding on the padding cover, make sure that
the cover is aligned at the left and right with the ironing
roller. To do this, spread the padding cover smoothly to
the right and left by gently brushing with your hands
as the pad is rolling on, causing it to slightly expand
outward. After winding on the padding cover, allow the
ironing roller to rotate for approximately ten turns.