Casio LD50 - Manual (Page 18)

E-16
272A-E-018A
■ Starting and Stopping Rhythm Play
Perform the following steps to start and stop rhythm play.
To start and stop rhythm play
1.
Select the rhythm you want to play (page E-15).
2.
Press the START/STOP button to start rhythm play.
3.
To stop rhythm play, press the START/STOP button.
• The following shows the default settings during rhythm play.
Mode when you pressed START/STOP
■ Using Synchro Start
With synchro start, you can put your Digital Drum into standby state from which rhythm play starts
automatically whenever you strike any of the drum pads.
To start rhythm play using synchro start
1.
Press the SYNCHRO START button.
• Your Digital Drum automatically exits synchro start standby if you press any button or if you do not perform
any operation for about 30 seconds.
• You can rotate the dial and change the setting of the currently display screen (RHYTHM VOL. in this
example), if you want.
Mode when you pressed SYNCHRO START
Note icon Flashing dial icon
Rhythm number
Rhythm name
Flashes to indicate standby. Flashing dial icon
Item Default Setting
Drum Set A0 : Auto
LIGHTING GUIDE SYSTEM Mode F2 : Dual Light
Play Level L0 : Off
02.10.28, 11:19 Page 16