Smart Power Systems Smart Cord - Manual (Page 3)

Installation/Applications of Smart Cord TBF™ (Model UTBF07SG-110)
1. Turn off and unplug the input cord of the equipment to be protected from wall outlet
2. Unplug the input cord from the back of equipment to be protected.
3. Plug the Smart Cord's IEC outlet into the IEC jack on the back of the equipment.
4. Plug the Smart Cord into a grounded wall outlet
5. Your equipment is now fully protected. Place the Smart Cord where monitoring lights
can be observed.
6. Save the equipment's input cord for future use.
IEC Outlet
TBF™
Power Cord
Circuit Breaker
Wall Outlet
Installation/Applications of Smart Cord TBF™
(Models UTBFxxSG-120,175)
1. Turn off and unplug the electronic equipment to be protected from wall outlet.
2. Plug equipment into the Smart Cord Unit.
3. If there is more equipment to be protected, plug them into the additional receptacles
of the Smart Cord unit (UTBFxxSG-175 models only).
4. Plug Smart Cord unit into grounded wall outlet.
5. Your equipment is now fully protected. Place the Smart Cord where
monitoring lights can be observed.
NEMA 5-15 Outlets (3)
NEMA 5-15 Outlet
Wall Outlet
Wall Outlet
TBF™
Power Cord
TBF™
Power Cord
UTBFxxSG-175
UTBFxxSG-120
UTBF07SG-110
FAX
MACHINE
MONITOR or
COMPUTER
POS
SYSTEM
INKJET
PRINTER
EXTERNAL
MODEM
IMPORTANT: The Smart Cord is designed to be compatible with a GFCI (Ground Fault Circuit Interrupter),
however, during plug in the GFCI might trip. Press the reset button to restart the circuit.
Note: Do Not plug more than 3 Smart Cord products to a circuit that has a GFCI circuit breaker or GFCI
wall outlets.
Installation of Smart Cord Plus to Network
NEMA 5-15 Outlets (2)
TBF™
Power Cord
UTBFxxSG-175 Plus
1. Turn off all equipment.
2 Unplug the network cable from the equipment you want to protect and plug into the "IN" jack on
the Smart Cord Plus. Plug the other end to the wall RJ45 network jack.
3. Plug the provided network cable to the "OUT" jack on the Smart Cord Plus. Plug the other end
of the provided network cable into the equipment you want to protect.
RJ45 Cable
Network Jack
RJ45
Cable