Snow Joe MJ401E-RM Mow Joe 14-Inch Electric Lawn Mower - Manual (Page 6)

6
Assembly
Before using the mower, follow these
instructions to assemble the handle and
grassbox.
Handle Assembly
1. Fit the lower handle into the two holes in the machine
body (A) and fasten them with the screws (B) provided.
2. Slide the wire management ‘Clip’ (C) onto the upper
handle (D).
3. Join the upper handle (D) to the lower handle (E) by means
of the knob (F), plastic washer (G), and bolts (H) provided.
m
CAUTION
m
Inspect wiring, which, if damaged during shipping, may
cause serious bodily injury during equipment use. If any
damage is seen or suspected, do not assemble. Instead,
contact Snow Joe Customer Service (1-866-766-9563)
for assistance.
Handle with care during assembly so that electrical
wiring does not become damaged.
Figure 3
A. Machine body B. Screw
A
B
C
Figure 4
D
F
G
E
H
C. Cable relief
D. Upper handle
E. Lower handle
F. Tighten knob
G. Plastic washer
H. Bolts