Tayama TG-100 - Manual (Page 3)

·If the supply cord is damaged, it must be replaced by the manufacturer to
avoid a hazard.
Before Using:
Clean the barbecue grill and its accessories. When it is first switched on, the
grill may emit a new smell. A small amount of smoke may also be noticeable.
We therefore recommend you to heat up the barbecue grill for about 5
minutes without any food on the grill.
How to Use Your Barbecue Grill:
Fill the tray with approx. . 2L of water or a thin layer or water on the tray.
Note: Within the min. and max. water level marks.
Connect the barbecue grill to the main supply socket and turn the thermostat
knob to the highest setting (“Max”), the pilot light will come on. Preheat for
about 5 minutes before use. When grilling delicate foods or for keeping
warm you can turn the thermostat back to a lower position and/or adjust the
grill rack to the middle or upper position.
Cleaning and Maintenance:
Before cleaning your barbecue grill, always make sure that the plug has been
removed from the mains supply socket. Allow the grill to cool down
thoroughly before cleaning.
Never switch the heating element on when it is not placed onto the appliance.
Clean the heating element with a clean and dry cloth only.
Clean the grill rack and the tray with warm soapy water and dry afterwards.
Do not use harsh abrasive cleaners or a metal sponge to clean the tray.
SERVICE & IMPORANT NOTICE
If the supply cord is damaged, it must be replaced by the manufacturer or an
Authorized Service Center to avoid a hazard.