Tayama BF-20B - Manual (Page 2)

OPERATING INSTRUCTIONS
A．IMPORTANT：
1.Before operation,make sure your local power supply is the same
as what is shown on the nameplate.
1
2
3
4
2.Make sure all parts are in good order.
3.Do not connect the power source until the fan has been
completely assembled.
B．MAINTENACE：
1.Wipe the shell using soft and clean cloth.
2.To clean the louver,first turn the louver cap to the left and remove
it,then remove the louver.
3.If the unit severity dirty,please use detergent(Must not attempt to
use solvents like thinner,gasoline,etc) then wipe off the detergent
with half dried cloth.
4.Do not immerse the unit in water to wash.
5.After the fan is cleaned then pack it into a viny bag and store it in a
cool dry place.
1.Speed control 3. Body
C．WARNING:
4. Grill 2. Grill switch
1.Use only with rated voltage.
2.Do not attempt to force the grill to turn.
3.During operation don’t put your hand or any other objects inside
the guard.
4.Do not attempt to force the louver to run,or push the whole fan