Rf interface, Antenna connector, Rf power output – ThingMagic USB Plus+ RFID Reader User Manual
Page 13: Frequencies, Data/control interface, Physical, Signaling, Antenna connector 13, Rf power output 13 frequencies 13, Physical 13 signaling 13
A D I V I S I O N O F T R I M B L E
USB Plus+ RFID Reader Specifications
13
RF Interface
Antenna Connector
Internal ceramic antenna with an average gain of 1dBi (Original: -2.6 dBi) from 860 to
960 MHz.
RF Power Output
Separate read and write levels (into the antenna), command-adjustable from 10 dBm
to 23 dBm (200 mW),
+/-1.0 dBm accuracy*
Note
Maximum power may have to be reduced to meet regulatory limits, which
specify the combined effect of the module, antenna, cable and enclosure
shielding.
Frequencies
Pre-configured for the following regions:
FCC (NA, SA) 902-928 MHz
ETSI (EU) 865.6 - 867.6 MHz, 869.85 MHz
KCC (KR) 910 - 914 MHz
SRRC-MII (P.R. China) 920 - 925 MHz
Open (Custom) 860 - 960 MHz
Data/Control Interface
Physical
USB mini-B connector, with 2 foot (61 cm) cable terminated in A-type plug.
Signaling
Asynchronous serial interface with 3.3/5V logic levels
Baud rates from 9600 to 921,600 bps