Accessory parts kit, A, b, c: m/f standoffs, m3, 10 mm, D: mmcx to u.fl (ipx) cable, rtang plug – ThingMagic M5e User Manual
Page 14: E: m3 pan-head screws, 6 mm (din 7985), F: m3 flat lockwashers (din 7980), G: 2” ribbon cable, 12 pos, 1mm pitch, Dware
Accessory Parts Kit
Accessory Board Configuration
13
Accessory Parts Kit
The following parts are included in the optional parts kit which provides all the necessary
parts to build up an 8-port multiplexer using two
, a
, a heat sink and an M5e. The label before each part refers to its location in the full
assembly as show in the
A, B, C: M/F Standoffs, M3, 10 mm
Notes: Stand-offs for first multiplexer, second multiplexer and power/interface board.
Part Number: Digi-Key 24337K-ND
D: MMCX to U.FL (IPX) cable, RTANG Plug
Notes: RF Cable for multiplexer
Part Number: Lighthorse Technologies CB1.32-IPX-MCLMGT-1.5”-NH
E: M3 pan-head screws, 6 mm (DIN 7985)
Notes: Screw for top board
Part Number: Digi-Key H742
Part Number: McMaster-Carr 92005A116
F: M3 Flat Lockwashers (DIN 7980)
Notes: Washer for top board
Part Number: McMaster-Carr 91111A118; 100 for $1.43
G: 2” Ribbon Cable, 12 pos, 1mm pitch
Notes: Only short cables needed if power/interface board mounted upside-down as
are multiplexers.
Part Number: Digi-Key WM10003-ND (Molex 21039-0269)