Torbal AD50 Quick Reference Guides - Manual (Page 11)

AD Series: Quick Reference Guide
Display Hold
Before using this reference guide, enable and configure Display Hold by following the steps listed in Chapter 7.1.3 of the
Instruction Manual. To enter the Display Hold mode press the “F” key, and select the function by pressing the “T” key
while “Display” is displayed.
1. Place a container on the pan and tare it by pressing the “T’ key.
2. Place the weight in the container located on the pan.
Automatic and Semi-Automatic Manual
The scale will automatically lock the weighing result
on the display as soon as it stabilizes.
Display hold is initialized by pressing the “F” key.
Once the weight is stable press “F” to lock the result
on the display.
1