Torbal AD Series Animal Weighing - Manual

AGC Series: Quick Reference Guide Torbal Laboratory Balances
Animal Weighing
Before using this reference guide, enable and configure Animal Weighing by following the steps listed in Chapter 7.1.3
of the Instruction Manual. To enter the Animal Weighing mode press the “Function” key, and select the function by
pressing the “T” key while “Animal” is displayed.
1. Place a container on the pan and tare it by pressing the “T’ key.
2. Place the animal into the container.
Automatic and Semi Automatic
modes
Manual mode
Animal Weighing will begin
automatically. Press the ”Function” key to initialize
Animal Weighing.
3. The scale will count down a time interval.
1