Chauvet Digital Camera - Manual (Page 7)

LED Mushroom™ User Manual 7 7/24/2009 4:35 PM
The fuse is located
inside this
compartment.
Remove using a flat
head screwdriver.
Hanging Clamp
3. S
ETUP
Fuse Replacement
With a flat head screwdriver wedge the fuse
holder out of its housing. Remove the damaged
fuse from its holder and replace with exact
same type fuse. Insert the fuse holder back in
its place and reconnect power.
Mounting
Orientation
This fixture may be mounted in any safe position, provided there is adequate room for ventilation.
Rigging
It is important never to obstruct the fan or vents pathway. Mount the
fixture using, a suitable “C” or “O” type clamp. Adjust the angle of
the fixture by loosening both knobs and tilting the fixture. After finding the
desired position, retighten both knobs.
When selecting installation location, take into consideration lamp
replacement access and routine maintenance.
Safety cables must always be used.
Never mount in places where the fixture will be exposed to rain, high
humidity, extreme temperature changes or restricted ventilation.
Do not mount more than 3 fixtures with the Xbracket.
Clamp is sold separately.
Disconnect the power cord before replacing a fuse and always
replace with the same type fuse.