Chapter 12: loading saved profiles and parameters – Torbal ATS120 User Manual
Page 21
Advertising
- 20 -
Instruction Manual – ATS / BTS Moisture Analyzers
To load saved parameters that have been stored in the memory, follow the steps below:
1.
Press the Menu key and use the navigation keys to select option 2 (Memory Settings)
2.
Use the navigation keys to scroll and select a desired memory location set of stored parameters.
3.
Once the set has been selected, press the ENTER key.
4.
Stored parameters will be uploaded into the Analyzer’s Configuration Menu.
Chapter 12: Loading Saved Profiles and Parameters
Advertising