Tycon Power TPSM-70x4-UNI - Manual (Page 2)

BOLT
5200009-05 (2 PLACES)
(COUPLER BRACKET)
70W SOLAR
PANELS (2 PLACES)
STEP 3: WHEN INSTALLING TWO SOLAR PANELS TOGETHER YOU MUST USE
THE COUPLER BRACKETS ON EACH SIDE AND USE 8 SETS OF BOLTS, WASHERS,
LOCK WASHERS AND NUTS. YOU WILL NEED TO MAKE TWO SETS OF THESE
ASSEMBLIES WHEN MOUNTING FOUR SOLAR PANELS TO THE RAIL SYSTEM.
WASHER
LOCK
WASHER
MOUNTING RAIL
HOLES (4 PLACES) HARDWARE
DETAIL
NUT
WASHER
LOCK
WASHER
STEP 2B: WHEN MOUNTING FOUR SOLAR
PANELS YOU WILL NEED TO EXTEND THE
MOUNTING RAILS BY ASSEMBLING TWO
RAILS TOGETHER WITH HARDWARE SHOWN.
YOU WILL NEED FOUR SETS OF THIS ASSEMBLY
TO MOUNT FOUR SOLAR PANELS TOGETHER.
BOLT
WASHER
LOCK WASHER
NUT
53.32in
1354.40mm
STEP 2A: ASSEMBLE MOUNTING RAIL
SYSTEM AS SHOWN IN THE 90°
POSITION USING 10 SETS OF BOLTS,
WASHERS, LOCK WASHERS AND NUTS.
NUT
BOLT
5200009-04
(MOUNTING RAILS)
BOLT
NUT
LOCK
WASHER
WASHER
STEP 4: ATTACH SOLAR PANEL ASSEMBLY TO
POLE BRACKETS USING FOUR SETS OF MOUNTING
RAILS, BOLTS,WASHERS AND NUTS. (EXTENDED
MOUNTING RAILS DETAILED IN STEP 2B ARE
NEEDED WHEN MOUNTING FOUR SOLAR PANELS)