Universal Remote Control (URS) MX-450 - Manual (Page 6)

Page 3
MX-450 O
WNERS
M
ANUAL
Replacing the Batteries
Open the battery cover by pressing the release and pulling back the cover
on the back of the control. Remove the cover.
Observe the + and - polarity indications inside the battery compartment.
Place the four AA batteries into their positions in the battery compartment,
observing the + and - polarity indicators on the batteries.
Now, replace the battery cover by inserting the hinged end in first, then
snapping the cover back into place.
Programming the MX-450
To fully automate an audio/video system, the programmer must have a
detailed knowledge of each component and how the system is connected
and operated. We highly recommend that you use a professional
audio/video installer to program your MX-450 so you will be able to
enjoy all the benefits of the MX-450.
Programming Options
The MX-450 is programmed via on-screen setup menus. Simply press and
hold the MAIN button for 3 seconds to view the menus:
Basic Setup: Selecting this option enables you to replace all your
remotes by either searching the built in database or
learning commands one at a time from the original
remote for the device.
Advanced Setup: Do not attempt Advanced Setup until you have com-
pleted Basic. Advanced Setup enables you to copy and
paste groups of commands like Volume and Mute,
setup macros, customize labels, add/hide pages, erase
and setup RF Addressing.
Favorite Channels: Do not attempt to setup Favorite Channels until you
have completed Basic. Favorite channels are macros
that enable you to tune to a channel with one touch.
User Settings: Selecting this option lets you adjust how long the
screen or the buttons stay lit.
Display Tips: Select this option to turn on or off the built in Setup
Tips. Setup Tips are the programming manual for the
MX-450. They appear on the screen in context.